Sensor ON/OFF

Dynaluxx luminaires can build with HF ON/OFF sensor to achieve auto-control. Switch on 100% upon motion detection and switch off after the hold time has elapsed. The built-in daylight sensor prevents the lumianire from switching on if there is sufficient natural light.

Features & Benefits

● Fully automatic, maintenance free

● Detection range (diameter x height): Max. 10m x 6m

● Selectable hold-time, sensitivity and daylight sensor

● Optional Photocell AdvanceTM Technology

● Energy saving: 50% ~ 70%

Dectection Pattern



Sensor Settings Demostration:

Hold-time: 10min

Sensitivity: 100%

Daylight Threshold: 50Lux


With sufficient natural light, the light does not switch on when presence is detected.


The light switches on automatically when natural light is below daylight threshold and presence is detected.


The light switches off automatically after the hold-time and no presence is detected.

Sensor Seting Options



Detection area can be adjusted by selecting the combination on the DIP switches to suit each application.

Sensitivity Option: 100% / 75% / 50% / 25% /10%


Daylight Threshold

The daylight threshold can be set on DIP switches to suit each application.

Daylight Sensor Options: 2Lux / 10Lux / 50Lux / Disable



Hold-time is the period the lamp stays on 100% after the person has left the detection area.

Hold-time Options: 5s / 30s / 1min / 5min / 10min / 20min / 30min

* Factory settings can be customized upon request.

Related Products